2000 ram wont start
 

i have a 2000 ram 1500 with a 318 one day just died 20 min ran went to parts house said was a cam sensor so took the cam sensor and brain out of his truck ( same excect truck) seam like it wants to start but wont seams like out of time i unplugged the crank sensor and spins nice plug back in same thing I NEED HELP i pretty well mechanically incline so but im lost here heard so many things bad ground,, a fuse ,,fuse box no good,, a sensor i have really no money to work with so the cheappeer the better ALSO ON THE DASH SAYS NO BUS help im lost

Moved to the correct section. Welcome to the forum.

Are you getting spark?

Maybe the person meant crank sensor?

yes gettin spark air gas new cap rpter cam shaft sensor new crank sensor tps sencor map sensor

Hhhhmmmm.....

Disconnect the battery for about 15 minutes. Then, reconnect, turn the ignition to "on" (not start), count to ten, THEN crank the engine, and see if it wants to start.

What brand crank/cam sensors?

ok ill try that,,, just ur basic brand

That may be part of the problem..... Our trucks don't really care for aftermarket sensors in critical locations.

that didnt work

Does the truck try and fire at all?