Still no spark, any suggestions?
So I posted awhile back about an issue that was somewhat similar which ended up being the PCM. I have a 98 1500. The other day while I was driving the truck it would flutter losing power is the only way I know to explain it. It was lose power and come back almost like a light switch every now and then. Until it just didn’t come back. It lost power and when dead so while still coasting I dropped to neutral and started back up just for it to lose power again and never start back up. It will turn over but not start. I cannot figure out why I still don’t have spark. After part chasing the problem I don’t know where else to check. I’ve replaced ignition coil, distributor cap, distributor rotor, pickup coil, crankshaft position sensor , and checked fuses and relays. I would be likely to think it was the pcm since this very similar to what I’ve already dealt with but I have another one that I know the truck will start with and swapped it with the same result. Any suggestions? |
What brand crank sensor did you install? Is the PCM spitting any codes?
|
Have you checked coil ??
|
Originally Posted by HeyYou
(Post 3425040)
What brand crank sensor did you install? Is the PCM spitting any codes?
|
Originally Posted by cruzer55
(Post 3425054)
Have you checked coil ??
|
Originally Posted by jtarrington
(Post 3425072)
which coil are you referring to? |
Failed PCM?
|
So I posted awhile back about an issue that was somewhat similar which ended up being the PCM. Oh and BWD is.. :icon_poop: |
I haven't bought a BWD part that works correctly. They've either been dead on arrival or don't work correctly. Either get a Mopar part or get a Standard Motor Products one from Rock Auto.
|
Either get a Mopar part or get a Standard Motor Products one from Rock Auto. |
1 CS from AZ, 1 from O'reileys, 2 from NAPA, the one that worked was the Mopar one.
|
All times are GMT -4. The time now is 08:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands