Gas Gauge Issue
 

I had to replace my fuel pump. When I did it the fuel gauge didn't work, it read E. Found out I didn't index the pump right, so I moved the bed instead of dropping the tank (34 gallons is heavy lol). After overcoming some issues it seemed to work. Went to a little below full, and after driving around went to 3/4 full. I filled it up and now it's stuck at 3/4. I tested the gauge it works. I unplug the pump and it goes to E. So I'm stumped. Any ideas?

Probably gonna have to go into the tank again, see if something got bent.

Always giving the bad news :D

They pay me extra for that ya know. :D