2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Luke's Link?

Thread Tools
 
Search this Thread
 
  #1  
Old 02-21-2006 | 01:56 PM
BFG's Avatar
BFG
Thread Starter
|
Rookie
Joined: Dec 2005
Posts: 63
Likes: 0
From: Manitoba Canada
Default Luke's Link?

http://www.mrtruck.net/draglink.htm


Has anyone put one of Luke's Link on and did you notice a difference?

Luke's Link Home Page was down when I posted this so I put in the above link... same stuff different page.

It would seem that this is an inherent problem on our trucks.


Let me know...
Dave
 
  #2  
Old 02-21-2006 | 03:56 PM
securtis12's Avatar
securtis12
Professional
Joined: May 2005
Posts: 139
Likes: 0
From: Searsport ME now Sumter SC
Default RE: Luke's Link?

I have a lukes Link on my truck and I like it. I would not say it is an improvement more than a more rugged version of the original. So far it works great and a big change from the wore out unit that was on my truck.
 
  #3  
Old 02-22-2006 | 12:05 AM
Cageman's Avatar
Cageman
Registered User
Joined: Feb 2006
Posts: 24
Likes: 0
From:
Default RE: Luke's Link?

I replaced all 4 ends and trackbar end and used their trackbar bushing. Went on simple and look like they will be bullet proof, much stronger then the factory ends. They come with a lifetime warranty and if any of the insides fail they will send them to you and are easy to replace.
 
  #4  
Old 02-22-2006 | 12:24 AM
Socha_62's Avatar
Socha_62
Record Breaker
Joined: Oct 2004
Posts: 2,456
Likes: 0
From: Gaylord, MI
Default RE: Luke's Link?

I read an article on Petersons Off Road about them and they had nothing bad to say.
 
  #5  
Old 02-22-2006 | 12:51 AM
Tani1500's Avatar
Tani1500
Champion
Joined: May 2005
Posts: 3,549
Likes: 0
From: Wyckoff, NJ
Default RE: Luke's Link?

ok how much these suckers going to cost me?
 
  #6  
Old 02-22-2006 | 12:55 AM
Cageman's Avatar
Cageman
Registered User
Joined: Feb 2006
Posts: 24
Likes: 0
From:
Default RE: Luke's Link?

I paid $55 each and it was $10 to ship. The whole frontend was just under $300 including the bushing. For a lifetime last fix I didn't think it was to expensive.
 
  #7  
Old 02-22-2006 | 12:59 AM
Tani1500's Avatar
Tani1500
Champion
Joined: May 2005
Posts: 3,549
Likes: 0
From: Wyckoff, NJ
Default RE: Luke's Link?

wait so its 55 bux for one or for all 4. im confussed?
 
  #8  
Old 02-22-2006 | 01:04 AM
Cageman's Avatar
Cageman
Registered User
Joined: Feb 2006
Posts: 24
Likes: 0
From:
Default RE: Luke's Link?

Each, so you have the 4 tie rod ends the 1 trackbar end and the trackbar bushing. Total of 5 links and 1 bushing. Just under $300 total shipped.
 
  #9  
Old 02-22-2006 | 01:04 AM
mxmancr250's Avatar
mxmancr250
Professional
Joined: Feb 2005
Posts: 107
Likes: 0
From:
Default RE: Luke's Link?

$55 for each part rebuilt, track bar, and 4 tie rod ends.
 
  #10  
Old 02-22-2006 | 01:11 AM
Tani1500's Avatar
Tani1500
Champion
Joined: May 2005
Posts: 3,549
Likes: 0
From: Wyckoff, NJ
Default RE: Luke's Link?

oh forget that. i can get a new track bar thats alot better for the same price. and i know don stands behind all his work.

http://thurenfabrication.com/stocktb.html

the one im getting for my truck is even better.

http://thurenfabrication.com/trackbar.html
 



All times are GMT -4. The time now is 04:40 PM.