Installing a JL Audio Subwoofer (Quad Cab)
I wanted some more bass in my truck and having a quad cab before I knew there was space behind the rear seat. I decided to go with a single JL Audio 10W1v2 behind the seat.
The enclosure is 13.5x13.5x7.5Bx3T equates to roughly a .30 box for a single 10. JL audio subs sound great any almost any enclosure. This sub was designed for a .6 cube ft but this enclosure works and it plays tighter due to air restrictions and keeps the coil centered better giving it better thermal handling capabilitys. The sub handles 300 watts RMS and plays low for a single 10. JL IMHO is simply the BEST! Remove the two outer T50 bolts on the lower section of the top half of the seat. Slide Up and out. Sit enclosure inside the space behind the seat and simply bolt the seat back on. Total time, 10 minutes. Amplifiers can be placed under the rear or front seats or behind the passenger side rear seat. Havent decided on that just yet. Finished product. http://i138.photobucket.com/albums/q...o/DSCN2922.jpg |
Looks nice. Can the seat top be put back on?
|
Originally Posted by Cuban11182
(Post 1567402)
Looks nice. Can the seat top be put back on?
|
Here is a project for you. Find a nice solid woofer grille to install over the JL. Go to the junkyard and find that seatback. Then modify the seat to accomodate the box. You could weld in U braces. Uncomfortable, but functional. Make sure if you add fabric to the back, it is as air transparent as possible. Speaker grille cloth, or similar. No vinyl, pleather, or leather. It would be slick to have the stock look back. Besides, if you're going to lose the seat, you might as well build a bigger box. I installed car and home systems for about 8 years. I've always been a Polk guy. Go ahead, impress me :)
|
Originally Posted by mprohr
(Post 1567547)
Here is a project for you. Find a nice solid woofer grille to install over the JL. Go to the junkyard and find that seatback. Then modify the seat to accomodate the box. You could weld in U braces. Uncomfortable, but functional. Make sure if you add fabric to the back, it is as air transparent as possible. Speaker grille cloth, or similar. No vinyl, pleather, or leather. It would be slick to have the stock look back. Besides, if you're going to lose the seat, you might as well build a bigger box. I installed car and home systems for about 8 years. I've always been a Polk guy. Go ahead, impress me :)
|
Originally Posted by dakolorado
(Post 1567413)
Yes, absolutely! You wont be able to fold it up though.
|
I'd still recommend a woofer grille.
|
Originally Posted by mprohr
(Post 1568036)
I'd still recommend a woofer grille.
|
Yeah, I'm just saying....It never hurts to have more protection. I've seen lots of mishaps with woofers, and If JL already makes it, you won't have any excursion issues.
|
Will the seat lift up at all? All I would need is to get at the crap under the seat, never have left it up.
HaHa, kinda reminds me of my wife and "other seat left up"... PS- did you make the enclosure? LB |
All times are GMT -4. The time now is 12:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands