DodgeForum.com - Replace lower control arm bushings or whole control arm?

Page 2 of 2

Show 40 post(s) from this thread on one page

DodgeForum.com (https://dodgeforum.com/forum/)

- 3rd Gen Dakota (https://dodgeforum.com/forum/3rd-gen-dakota-68/)

- - Replace lower control arm bushings or whole control arm? (https://dodgeforum.com/forum/3rd-gen-dakota/280728-replace-lower-control-arm-bushings-or-whole-control-arm.html)

Dakkkota

02-18-2011 04:22 PM

set them on fire (people do that on motor mount to fabricate them with window weld)and go in a machine shop and fab eurethane or bearings of anything greasable pressed in.

Eimer123

02-18-2011 06:50 PM

Quote:

Originally Posted by donkeypunch (Post 2421231)

Who sells these greasable joints?

I am sorry for the confusion.. I mean outer tie rods and upper and lower ball joints.

All times are GMT -4. The time now is 12:05 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page