DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   3rd Gen Dakota (https://dodgeforum.com/forum/3rd-gen-dakota-68/)
-   -   2005 Dakota Bumper Fixup (https://dodgeforum.com/forum/3rd-gen-dakota/343660-2005-dakota-bumper-fixup.html)

BumperBumped 12-09-2012 02:05 PM

2005 Dakota Bumper Fixup
 
I've worked on my truck before but this is new territory to me. What exactly do I need to buy from ebay to replace the entire front bumper? I see reinforcement + covers + brackets. Do these come together as one assembly?

Here is the damage:
https://i.imgur.com/FdjG0.jpg
https://i.imgur.com/G31At.jpg

Florida driving amaright?

Reject 12-09-2012 02:32 PM

I think it is,
Bumper Cover
Steel Bumper Support (Middle Area)
Plastic Bumper Support

There isnt really any brackets I think, Its just 8 bolts from the Steel Support to a plate welded on the frame end.
The cover is held on by 9 Screws, 3 Across the top under the Grill, and 3 on each side.

You can see the Plastic and Steel Supports here
http://i12.photobucket.com/albums/a2...7/SAM_0432.jpg
http://i12.photobucket.com/albums/a2...7/SAM_0431.jpg
Here you can see where the Bumper bolts on
http://i12.photobucket.com/albums/a2...4/SAM_0881.jpg

BumperBumped 12-09-2012 02:43 PM

What is that plastic under the cover called? I found a bumper cover for 40$, steel support for 85$. Its pic #1/#2. Thank you immensely for this

http://www.berrysprinter.com/e-Fiche...02-05/05nd.PDF
141/379
Problem Solved! I need brackets + reinforcement + cover!

Reject 12-09-2012 04:04 PM

Was the Plastic and Steel supports just the Reinforcement? Curious to know.

BumperBumped 12-09-2012 06:05 PM

The reinforcement was steel , rest plastic. Still not 100% sure until it comes to my door

DaKoCuN 12-09-2012 07:28 PM

How that happened!

Altair 12-09-2012 08:39 PM

Run into someone's trailer hitch? My bumper looks similar to that right now though not as bent out of shape. My dad may have backed up a bit too fast last time I was visiting home, I don't park behind him anymore. :D

Alfons 12-09-2012 09:12 PM

I would take the bent one apart and see if a few "well placed whacks" would straighten out the steel enough to hold the plastic cover properly. That plastic can hide a lot of dings in the steel, as long as the contour is beaten into shape.

BumperBumped 12-10-2012 12:22 AM

Yeah was a trailer hitch. The thing is toast and I don't think I can hammer it in place unfortunately unless I was Thor or something.

durapu 12-12-2012 10:52 PM

1 Attachment(s)
Just Buy My custom bumper and Next time it will be his hitch that gets bent (not really but there wouldnt be that type of damage)

Attachment 46522


All times are GMT -4. The time now is 03:39 PM.


© 2024 MH Sub I, LLC dba Internet Brands