Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Tire Repair and Maintenance
- Dodge Ram: Tire Modifications and Size Calculator
Overview of popular modifications to customize your Ram
Browse all: Tire Repair and Maintenance
WHEEL & TIRE FITMENT on DODGE RAM
#161
tire size on a 5" lift 06 2500 ram diesel
Hey everyone,
I am planning on putting a 5" lit on my 2006 dodge ram mega cab diesel. The lift is from rough country long arm kit. I know that they say it will run on 37" tires but I actually use my truck, not just for looks.
So I was thinking running 35" mudders so I get full articulation wo rubbing.
And also wondering about the back spacing as well. I want them to stick out a bit from stock, but not too far so it wont look dumb.
Any suggestions??
Thanks a bunch,
Don
I am planning on putting a 5" lit on my 2006 dodge ram mega cab diesel. The lift is from rough country long arm kit. I know that they say it will run on 37" tires but I actually use my truck, not just for looks.
So I was thinking running 35" mudders so I get full articulation wo rubbing.
And also wondering about the back spacing as well. I want them to stick out a bit from stock, but not too far so it wont look dumb.
Any suggestions??
Thanks a bunch,
Don
#162
Hey everyone,
I am planning on putting a 5" lit on my 2006 dodge ram mega cab diesel. The lift is from rough country long arm kit. I know that they say it will run on 37" tires but I actually use my truck, not just for looks.
So I was thinking running 35" mudders so I get full articulation wo rubbing.
And also wondering about the back spacing as well. I want them to stick out a bit from stock, but not too far so it wont look dumb.
Any suggestions??
Thanks a bunch,
Don
I am planning on putting a 5" lit on my 2006 dodge ram mega cab diesel. The lift is from rough country long arm kit. I know that they say it will run on 37" tires but I actually use my truck, not just for looks.
So I was thinking running 35" mudders so I get full articulation wo rubbing.
And also wondering about the back spacing as well. I want them to stick out a bit from stock, but not too far so it wont look dumb.
Any suggestions??
Thanks a bunch,
Don
Hi don for a little pokage out the side i suggest going with a -12mm offset. I run a 17" fuel hostage 10" wide. 4.50 back spacing. -12mm off set. STicks the 35x12.50s out about a inch inch and a quater.
https://scontent-atl.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/1620425_886904291369734_7806522313483550259_n.jpg? oh=9dbe47ffa603b4762880ccee60fbbaf4&oe=55825023
#163
06 cummins 5 inch lift with 37s
Hey there really trying to figure out if there's anywyas to fit 37x12.5x18 toyo mts on a 5 inch rough country long arm lift. Basically I need to know if possible what combination of offset/back spacing it would need to fit them. Probably looking at fuel rims if possible thanks for the help