Lamp out?
#12
RE: Lamp out?
Do the electrical sprayclean, that has been suggested and then, when replacing the bulbs, put a little smear of hi temp silicone sealer on the bulb and it's fitting, bridging it.
When the sealers set, no vibrations will work the bulb loose and cause oxidisation on the contacts etc.
This is great for offroaders'
I've done it and have never had this for two years now.
Al.
When the sealers set, no vibrations will work the bulb loose and cause oxidisation on the contacts etc.
This is great for offroaders'
I've done it and have never had this for two years now.
Al.
#13
RE: Lamp out?
well mine is doing the same thing. it came on like 4 months ago and i changed my back left bulb becasue it went out, and it still didn't come on, i ithnk the wiring is wrong somewhere. i had to have my intrument panel replace inFeb. and teh guy said some stuff could go out because it was a new wiring harness, so idk if thats it or not, but pretty sure i got ripped off on that deal too.
#14