DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   3rd Gen Ram Tech (https://dodgeforum.com/forum/3rd-gen-ram-tech-65/)
-   -   Diagnostic Code P1491 (https://dodgeforum.com/forum/3rd-gen-ram-tech/130937-diagnostic-code-p1491.html)

ldmd64 10-29-2007 08:53 PM

Diagnostic Code P1491
 
Anyone have ideas code cam on two days ago feels a little sluggish, 2002 dodge 1500, 4.7 L, loaded.

MikeHTally 10-29-2007 09:24 PM

RE: Diagnostic Code P1491
 
"Radiator Fan Ctrl Relay Circ" Maybe the computer thinks the fan's misbehaving, so it backs off the power?

Parts/Service 10-29-2007 09:39 PM

RE: Diagnostic Code P1491
 
This may sound strange, but I have seen this code many times. Check all fusesin the power distribution center under the hood. I bet you find a blown fuse...

Parts/Service 10-29-2007 09:43 PM

RE: Diagnostic Code P1491
 
I think that it is fuse # 39.

matthewbeard 03-31-2009 07:06 PM

Bump -

Just had this happen, headed out to check the Fuse.

matthewbeard 03-31-2009 08:23 PM

update: Fuse was blown, replaced still didn't fix. manual says relay could also be bad. ordered up a relay should be in by thursday

seabass202 01-13-2010 05:03 PM

I know this is an older thread but it is just what I have going on right now. Code p1491 and a blown #39 25a fuse ( a/c condenser fan motor relay ). will get fuse tomorrow and see if anything else acts up. however I have two questions my scanner says code p1491 is "mfg installed emission control system" also would this have anything to do with my heat/ blend door or something acting up...NO HEAT. if so that would be great 'cause I dont wanna tear into this dash! and this is on my 02 3rd gen

ramhunter9 01-13-2010 05:28 PM

wow!! a fella that used the search function before posting a new thread ...I give you a big AT-A BOY on this one ...come on guys lets help him out....i know he is a 2nd genner maby this can be moved over their fo support??

seabass202 01-14-2010 05:29 PM

I replaced the fuse, it is holding, probably just to much resistance one frozen morning and it popped.

GixxerNate 11-15-2012 12:00 PM

I'm having the same problem, has anyone successfully fixed the issue?

02 Ram 1500, 4.7 automatic, almost 167k miles
Check engine light is on. Fan was not working and fuse 39 was blown. Replaced the fuse, swapped the relay, and cleared the CEL. Now the fan works, but the CEL stays on with the same p1491 code. I've read about other issues with the wiring inside the fuse box corroding. Think this could be related? Open to suggestions.


All times are GMT -4. The time now is 01:39 PM.


© 2024 MH Sub I, LLC dba Internet Brands