can i fit 35's
 

i have a 05 4x4...can i fit 35x12.5 on the stock 20's with just the front bars crank about 2" in the to level the truck out?

They will rub. you would have to cut the front bumper a little

33x12.50 look better 35"s with no lift looks funny to me. i like big wheel and some fender. not all wheel...looks to crowded

oh and by the way im running 33x12.50-20 on stock rims looks sick. and best of all....just a few t-bar rounds and no problems

im running 35's with just a t-bar crank.......

You can fit 35's no problem! Now the 12.5 might cause some rubbing if you don't have the proper wheel spacers! But if you get the right combo you will have no issues! Just look at Jonnymagnum, he is running 35's with just a t-bar crank and he has no issues!

guess i was wrong lol. Ive heard mixed respnses about it. I guess i didnt take tire width into consideration.

MR Magnum do you have spacers/adapters?

ive got 33 on 17s and i cannot get a finger between the tire and the suspension. 285/70/17s actually. i think those are 11.5 wide. if you were to go to 35s with a width of 11.5 you could prolly get away with it without lift. with 20s though not sure. im gonna try 35s when i need new rubber and no lift but theyll have to be the narrower size if i can find them.

with the 33 12.50's on stockers i had about a inch of room before the tire hit the suspension . didnt have a problem with it , but to be safe i put on 2" hub centric wheel adapters.