![]() |
pillar painting
so i did all my back pillars in krylon fusion they worked out great, then i tried to put my front ones in and because it was a tight squeeze i had to kind of force them back in and the paint scraped up, any ideas on how to go about getting them in without doing it that way i mean it went through all my layers of clear and paint, so i was wondering about sanding them back down and using that vinyl dye any advice would help
|
not sure how to stop the paint from chipping but would like to see some pics of the pillars and the chip then maybe help.
|
good point give me 20 ill go take some
|
heres some pictures
http://www.facebook.com/photo.php?pi...&id=1259820011 http://www.facebook.com/photo.php?pi...&id=1259820011 http://www.facebook.com/photo.php?pi...&id=1259820011 and thats not even the worst of it thats as far as i tried getting it in so im sure it would be worse if i fully put them in |
You could try to put some light tape over the places were it chips the pull it of aslong it dosnt pull the paint off or you might have to pull the headliner down!
|
yeah i was gunna try that and im not too worried about the tape lifting the paint because i give it over a day to dry and all that but im worried about not being able to get the tape off then re having to do it and i had the headliner dropped yesterday but didnt help getting the bottom in
|
i didnt think about the bottom you might have to like place a bag over the end then try to pull it out at the end or cut it to were its not visible
(redneck way) |
ha yeah that might work, its killing me because everything is done but cant be put back in
|
Hey man, i did the same thing to my pillars. When I put mine back in they only scraped a little on the bottoms so I took some of the same paint I used to paint them with on a small brush and touched up the spots. You can't tell it now.
|
thanks, were yours really hard to get in as far as took some force, did you paint them with a gun or spray paint?
|
Had to sort of slide the bottom in to where it snapped in place. Thats where the bottom gets scratched. Judging from your pics yours scratched up pretty good on the bottoms. Mine only got scratched right above the dash. I spray painted mine with Vinyl and Upholstery paint and I primed it first with Adhesion Promoter. That stuff is good for all kinds of surfaces but especially for vinyl and plastics.
|
the vinyl and upholstery paint or dye? cause i have the dye and was getting ready to try that
|
Cant wait to see this finished....i might have to do it. I am not a fan of my tan plastic.
|
yeah that tans been buggin me for a while now im trying to find a way to take the warning stickers off the visors so i can do those black but having a problem with that and cant tape it off perfectly so im gunna wait to find a way to take it off
|
keep me posted w/ pics!
|
will do, waiting for the rain to stop so i can roll the jeep out and start the repainting process so i may not be able to paint again till tomorrow so im sure by the end of the week i will have it done come hell or high water its gunna get done
|
Originally Posted by irelandshemi
(Post 1638255)
the vinyl and upholstery paint or dye? cause i have the dye and was getting ready to try that
|
Where'd u get that adhesion promoter?
|
Originally Posted by irelandshemi
(Post 1638313)
yeah that tans been buggin me for a while now im trying to find a way to take the warning stickers off the visors so i can do those black but having a problem with that and cant tape it off perfectly so im gunna wait to find a way to take it off
|
hmm didnt think about vasoline on them, i wonder if when i go to rub it off tho if it will do something with the dye
|
Originally Posted by mfs212
(Post 1638378)
Where'd u get that adhesion promoter?
|
All times are GMT -4. The time now is 03:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands