When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Well, I had bought a set of Hummer wheels/tires, and ended up selling the wheels on Craigslist for what I paid for the whole package. I then went out and bought a set of 17x9 wheels for the BFG tires, and could not be happier. Good luck.
I am running this tire size on mine with stock factory rims, and they look great, don't look weird at all.
They are just shy of 12.5" wide and just shy of 35"
Technically, they are 12.4" wide and 34.4" tall.....lmao
Every manufacturer specs are diff. though, as some measure center height and some measure outer edge height. Same as width. Some measure outer most edge and some measure to the sidewall outer most part when mounted which is a cheezmo measurement IMO. BFG prob measures center to center and side of tread to side of tread as should be.
If those tires are half worn they may only measure 33.5-34" tall which is enough to not rub, but the side still will, so spacers are needed.
Close enough to rub though. Spacers are needed on stock wheels. Great buy regardless as long as there is plenty of trad life left. There was no mention of tread depth...etc...