3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

hesitation and or sputter

Thread Tools
 
Search this Thread
 
  #1  
Old 10-13-2010, 04:11 PM
menektos's Avatar
menektos
menektos is offline
Registered User
Thread Starter
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default hesitation and or sputter

I would like to know if some one could help me out. I have a 08 Dodge Ram 1500 with the hemi 5.7. I just put a K&N cold air intake in and the truck is acting funny. When I am driving at a constant speed the truck runs fine if I just give it a little or a lot of gas it seems like it has a hesitation or a sputter. After the hesitation or sputter it takes off it dose it with the cruse control on or off, but it will not do it when I put my tow haul switch on. Can some one guide me in the right direction to my problem?
 
  #2  
Old 10-13-2010, 04:13 PM
dirtydog's Avatar
dirtydog
dirtydog is offline
Moderate User
Dodge Forum Moderator
Join Date: Oct 2008
Location: Albany, NY
Posts: 17,003
Likes: 0
Received 18 Likes on 9 Posts
Default

The problem here is your MDS activation. First I did when i purchased my Superchips tuner was turn the mds off. Truck is much more responsive now.

When you activate Tow/haul mode or O/D off you disable the MDS which is why the problem goes away.

mds=4cylinder deactivation.
 
  #3  
Old 10-15-2010, 06:07 PM
menektos's Avatar
menektos
menektos is offline
Registered User
Thread Starter
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the info can the dealer turn off the MDS
 
  #4  
Old 10-17-2010, 05:49 PM
menektos's Avatar
menektos
menektos is offline
Registered User
Thread Starter
Join Date: Oct 2010
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

The problem is fixed believe it or not it had to do with the oil that was put in my truck. The oil change company put 5W30 into the truck and I was told that the oil must be 5W20 or you could have a problems with the MDS. AT first I did not Believe it but after some research it all works off oil presure. So I took a chance and changed the oil and DAM IT WORKED!
 
  #5  
Old 10-17-2010, 06:02 PM
AZZO540's Avatar
AZZO540
AZZO540 is offline
Veteran
Join Date: Mar 2010
Location: Fernandina Beach FL
Posts: 332
Likes: 0
Received 0 Likes on 0 Posts
Default

Good sh*t
 
  #6  
Old 10-18-2010, 01:10 PM
weedahoe's Avatar
weedahoe
weedahoe is offline
Hall Of Fame
Hall of Fame Member
Join Date: Mar 2009
Location: South GA
Posts: 19,166
Received 19 Likes on 18 Posts
Default

Glad to see you got it resolved. What oil type does your oil cap say to use?
 



Quick Reply: hesitation and or sputter



All times are GMT -4. The time now is 11:41 AM.