06 Ram seat removal and install.
#1
06 Ram seat removal and install.
600.00 for dealer parts only to replace the worn fabric and foam on my drivers seat, I have started to look for a used drivers seat in med slat grey, or the whole 40 20 40 front seat in anothier color, My existing seats are non power and I have the wiring ,( or presume I do) but no fuses in the box where it says power seats.
Would be able to plug and play if I found power seats?
Would be able to plug and play if I found power seats?
#2
#5
#6
131.00 bucks shipped to my door in US funds, found bottom seat cover at moparonline parts.com, the bottom foam can be had on ebay for arround a 100.00 bucks, vers 600.00 cdn at varsity chrysler in calgary for just the parts!!!!
I also think that the 06 ram 2500 seats to 2010 are the same, where as the 1500 Rams from 2009 don't use identical seats.
My concern when I do this repair my self is how preven the foam from falling apart, is thier anything I can put on the metal frame, like duct tape, dbbl sided tape, ect to lesson the wear down of the foam?
I also think that the 06 ram 2500 seats to 2010 are the same, where as the 1500 Rams from 2009 don't use identical seats.
My concern when I do this repair my self is how preven the foam from falling apart, is thier anything I can put on the metal frame, like duct tape, dbbl sided tape, ect to lesson the wear down of the foam?
#7
Trending Topics
#9
I actually need a driver's side seat bottom cover in premium slate gray due to a few cuts in mine but can't seem to find one. Is that what you found on MoparOnlineParts.com? You wouldn't be able to sent me a link to it would you? That would be epic. $131 is a great price. The dealer quoted me like $250 or so for just that one piece.
Last edited by IamFrank; 02-27-2012 at 02:43 AM.
#10
I had a guy quote me $300 a seat just to take the leather off, replace foam, rework the metal a bit to prevent future wear, and put the old leather back on. This was a small company upholstery (1 or 2 guys, small shop). Says its lots of labor. Foam should be easy and cheap to get from just about anywhere. Stop by any Upholstery place or even a cushion factory and get the foam you need. You might have to cut to fit, but should be cheap.
It can't be that tough a job, even with my power heated seats? Dodge is out to lunch at that price.
It can't be that tough a job, even with my power heated seats? Dodge is out to lunch at that price.