When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
#4 & 8 definitely have some stuck open valves. I think that's the worst spread on a compression test I've ever seen. You better get in there.
Yeah, compression test didn't look good at all Took it apart today and noticed that the #8 & #4 intake pushrods weren't even in the holes to the lifters!
I ended up putting in the 6.1 intake and exhaust pushrods on both sides. I started it up and it purrs. I drove it for a while and everything is smooth. Thanks guys
Glad you got it sorted...how's it roll with the 6.1 intake?
Sorry it was misleading...both intake and exhaust pushrods, not the actual 6.1 intake manifold. On that topic though, I've heard that it loses a little low end or I'd probably try to find one.
Sorry it was misleading...both intake and exhaust pushrods, not the actual 6.1 intake manifold. On that topic though, I've heard that it loses a little low end or I'd probably try to find one.