2007 1500 2in lift installed
#1
2007 1500 2in lift installed
I wanted to gain little more clearance off-road.
Here is before the install.
Here is after the install
I ordered some coil spring spacers from Ebay.
https://www.ebay.com/itm/FOR-DODGE-R...72.m2749.l2649
As I was working on the front suspension, I noticed I needed upper and lower ball joints, I ordered new Moog upper and lower control arms from Rockauto.com. Of coarse I got an alignment after all was installed.
Out back I ordered Superlift add a leaf kit
https://www.summitracing.com/parts/slf-2517
Once installed I noticed the rear shocks were not fully extending as much as when the suspension is fully extended, so I ordered these Ram 2500 shock extensions, they only needed the factory shock hole drilled in a lower position than the provided hole.
https://www.ebay.com/itm/Rear-Shock-...NaU~8C&vxp=mtr
For shocks, I went with Gabrel MaxControl Shocks.
Just for fun, I got some simple fender flairs, Super easy to install.
https://www.ebay.com/itm/For-02-08-R...72.m2749.l2649
I'm not sure if I posted this but I also bought this bull bar from Ebay. This will do untill I want to spend some $$$ for a winch bumber.
https://www.ebay.com/itm/06-08-Dodge...item1c9e47da54
For camping, I found a soft top camper shell from Bestop. I love the easy setup and disassibablity. Aluminum and fiberglass shells are heavy and you have to have somewhere to store them when not in use.
Here is before the install.
Here is after the install
I ordered some coil spring spacers from Ebay.
https://www.ebay.com/itm/FOR-DODGE-R...72.m2749.l2649
As I was working on the front suspension, I noticed I needed upper and lower ball joints, I ordered new Moog upper and lower control arms from Rockauto.com. Of coarse I got an alignment after all was installed.
Out back I ordered Superlift add a leaf kit
https://www.summitracing.com/parts/slf-2517
Once installed I noticed the rear shocks were not fully extending as much as when the suspension is fully extended, so I ordered these Ram 2500 shock extensions, they only needed the factory shock hole drilled in a lower position than the provided hole.
https://www.ebay.com/itm/Rear-Shock-...NaU~8C&vxp=mtr
For shocks, I went with Gabrel MaxControl Shocks.
Just for fun, I got some simple fender flairs, Super easy to install.
https://www.ebay.com/itm/For-02-08-R...72.m2749.l2649
I'm not sure if I posted this but I also bought this bull bar from Ebay. This will do untill I want to spend some $$$ for a winch bumber.
https://www.ebay.com/itm/06-08-Dodge...item1c9e47da54
For camping, I found a soft top camper shell from Bestop. I love the easy setup and disassibablity. Aluminum and fiberglass shells are heavy and you have to have somewhere to store them when not in use.