When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey guys quick question....I have the honey comb grill but am trading a friend that has the silver aluminum slots grill.....they have rivets on the back end of it , to me it seems like the best way to remove the grill is drill out the rivets... but i figured id see if you guys have done this before, any thoughts or other ways?
i figured id drill them out and buy new rivets at dodge...
push the center pin through then remove the rivet body then put the pin back in the top of the rivet and you can reuse it there not real rivets just push pins
Last edited by eaglestorm; 10-26-2008 at 08:35 PM.
Yea, I did notice that although its impossible to get to the back side of the pin to push it, unless im thinking incorrectly and i can just pust the pin in? rather than out?