When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
LOOKING TO INSTALL A LEVELING KIT ON MY 07 RAM,LOOKING AT THE TRUXXX 2" SPACER KIT AND WAS JUST WONDERING IF ANYONE HAS INSTALLED ONE YET AND THE RESULTS OF IT...THANKS!
I put a 3" lift under the front of my '99 2500 4x4 CTD....I like the look but it was a b*tch compressing the front coils!! I would pay somebody next time to do the install. Just my .02 worth.
It's 4 wheel drive,have you had any problems at all with the daystar,im just worried about riping my cv joint boots.i lifted the front of my truck up with a hydrulic jack just to get an idea of what it would look like and with it up 2" my cv joint boots looked really bunched up/smuched together.a couple of my friends did their's with torsion bar keys and went up 3" and they are riping boots like every couple months.obviously i have struts. just don't wanna have problems especially cuz i have that lifetime drivetrain warranty ya know
I put it on my 2007 1500 quad cab i had picture's in a post about a month ago it was a bitch compressing the spring because i had a piece of crap compressor but it look's good and ride's great Suspensionconnection.com
I put it on my 2007 1500 quad cab i had picture's in a post about a month ago it was a bitch compressing the spring because i had a piece of crap compressor but it look's good and ride's great Suspensionconnection.com
Sorry I missed this thread... you could have saved yourself the agrevation of compressing the springs... it's not necessary... have a look at this thread https://dodgeforum.com/m_901296/tm.htm swapping the springs or installing the spacers is a real simple process. doesnt matter if it's on an '05 or a '94... same front end.
welcome to DF...
edit: oops, thought this was the CTD forum and you had the SFA up front... not sure how hard the IFS spacer install would have been, my bad, sorry.