When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
37's are on guys take a look took forever to get them to balance but are now good to go, just need to trim a spot on the lower fender plastic . it rubbed at full lock but i just need to trim half a inch no biggy.
Trim my a$$ boy!!! As the former owner of three solid axle trucks I am telling you this from experience: Rubbing is a perfectly valid excuse to go with MORE LIFT!!!
From: Minot AFB, ND in person, the 'burgh at heart
Originally Posted by HammerZ71
Trim my a$$ boy!!! As the former owner of three solid axle trucks I am telling you this from experience: Rubbing is a perfectly valid excuse to go with MORE LIFT!!!
thats a lot of a$$ to be trimmin on you
but you do bring a valid point. RH there is no excuse for trimming.
Trim my a$$ boy!!! As the former owner of three solid axle trucks I am telling you this from experience: Rubbing is a perfectly valid excuse to go with MORE LIFT!!!
its not the truck its the dam bushwacker flares the little tabs that dont belong and hitting i got the fix for them .
and AF pics dont do it justice . im 6"3 and i have a hard time getting in and out even with the steps . the tires just added me 2 more inches .
The dunes out in Florence Joe, I parked it on that hill for that little photo My camera stopped working right after that photo so I didn't get any other good ones!
I got to find out how well my truck makes it out around those dunes even in 2wd Only the really super soft spots required me to have it in 4.
its not the truck its the dam bushwacker flares the little tabs that dont belong and hitting i got the fix for them .
and AF pics dont do it justice . im 6"3 and i have a hard time getting in and out even with the steps . the tires just added me 2 more inches .
From 35's to 37's it only raises the truck up another inch actually, because the radius is only increased by an inch since the diameters raised by 2 and the radius is always half of what the diameter is. But even still, an inch can seem like a lot on these trucks! Just going from a small 35 to a true 35 I noticed a difference on my truck!
From 35's to 37's it only raises the truck up another inch actually, because the radius is only increased by an inch since the diameters raised by 2 and the radius is always half of what the diameter is. But even still, an inch can seem like a lot on these trucks! Just going from a small 35 to a true 35 I noticed a difference on my truck!
thanks you for that knowledge cherry , didnt know that , im just pumped i have 37's lol