P 1004 code
#1
P 1004 code
I hope nobody else gets this code but there are several trucks out with the defective Short Runner Valve. My truck has been in the shop for a wk and a half waiting on parts. To fix this the intake has to be pulled along with all other parts involved in that. Its sad to have a new truck with 2400 miles go through this.
#2
#4
#7
no drips--yet. both sides of the block are a little damp. nothing to really worry about right now. i checked underneath when our oil guy did my oil change. thats when i found it, kinda pissed me off. now that i know about it, im gonna keep an eye on it. if i see the slightest drip forming, ill put in some dye.
2009 MY 5.7 VVT only. its in dodge service info that us employees have access to. i check for new TSB's, RRT's, and recalls regularly for the 09s
2009 MY 5.7 VVT only. its in dodge service info that us employees have access to. i check for new TSB's, RRT's, and recalls regularly for the 09s
Trending Topics
#8
#9
no drips--yet. both sides of the block are a little damp. nothing to really worry about right now. i checked underneath when our oil guy did my oil change. thats when i found it, kinda pissed me off. now that i know about it, im gonna keep an eye on it. if i see the slightest drip forming, ill put in some dye.
2009 MY 5.7 VVT only. its in dodge service info that us employees have access to. i check for new TSB's, RRT's, and recalls regularly for the 09s
2009 MY 5.7 VVT only. its in dodge service info that us employees have access to. i check for new TSB's, RRT's, and recalls regularly for the 09s
#10
honestly, its nothing to worry about right now. for the most part, the new 5.7 is the same as the old one, therefore should be just as reliable. the 1004 code is mainly caused by the harness for the short runner valve not being long enough or not routed right. my potential "oil leak" is no big deal to me (thanks to lifetime warranty). i talked to one of our engine guys yesterday, hes never done a 5.7 rear main. he said mine might be anarobic sealant used at the factory, and it could be leaking/being slung out.