uconnect frozen.....It only shows the Ram logo.
#1
uconnect frozen.....It only shows the Ram logo.
2014 ram 5" screen with rear camera. Camera works,but just goes blue and when I slow down in drive it comes back on. I have no radio and no way to control it. Disconnected negative on battery for 15 min and ive tried holding the search an volume buttons.....nothing works
#3
"soft reset of the uConnect by having the car running with all doors closed and pressing and holding both the phone button on the touch screen and the phone button on the steering wheel for 30 secs. After that turned the vehicle off for 15 secs the finally opening the drivers door, and leaving it open for 30 secs."
#5
Well hell... try this... put truck in acc mode, then, hold the red temp up [^] and blue down [v] simultaneously for about 8 seconds (physical buttons, not virtual). The engineering menu on the 8.4a/n should appear. The last menu item on the first page is 'Reset Radio'. This is the re-boot option. Don't mess with these settings unless you know what you are doing, but a reboot is pretty straightforward. Do not do 'Reset to factory default' or you lose the upgrades.
#7
Damn, I forgot all about those... the only thing I was able to find was this: http://goo.gl/myq8NZ. Doesn't look good...