2008 Caliber 2.0 NON SRT rear struts
 

Hi I have a 2008 Dodge Caliber 2.0. The basic model, manual windows and doors etc. I recently bought rear struts online. The struts are identical. I put the passenger side on and it fit perfect. The driver side does not. The company says these 2 struts are interchangeable from driver to passenger. This does not make sense to me logically because the bottom crossbars are angled slightly toward the front. So, if the passenger side strut fits correctly then the driver side would naturally be angled toward the rear. I tried to make it work but it doesn't. Can anyone verify this for me, or am I just crazy. If the 2 struts are different then does anyone know the 2 different strut #s, so I can tell them. The strut would fit if I turn the top 180 degrees, but I didn't pay for struts I have to fix to fit.
https://cimg4.ibsrv.net/gimg/dodgefo...4588f9eebb.jpg
https://cimg5.ibsrv.net/gimg/dodgefo...d9aa584a35.jpg

Thank you in advance for your help.

The rear struts are identical. If the mounting points won't line up just twist until they do: Before installing, put a screwdriver in the bottom mount for turning leverage while holding the top mount steady. If it won't turn you may have a defective unit.

So is that the way struts are normally. Im not a mechanic soI don't know. You buy them and have to rotate them to make them fit. I thought when you buy a part it should fit. I borrowed some spring compressors and turned it 180. I just thought that wasnt right that you pay for parts you have to fix.