First Post, 2009 GC Front Blower Resistor
#1
First Post, 2009 GC Front Blower Resistor
I need to find the location of the front blower resistor, as I lost all fan operation and the resistor fuse could be the problem.
Everyone says it's right behind the glovebox door, but after I dropped the door, it is nowhere to be seen.
Does anybody know where it may be?
Thanks,
Stan
Everyone says it's right behind the glovebox door, but after I dropped the door, it is nowhere to be seen.
Does anybody know where it may be?
Thanks,
Stan
#2
So you removed the glove box drawer and it's no where in sight. The web has little on location on a 5th generation van. The few statements on 08s there say as you say, "it's behind the glove box door". Can't find anything on an 09. What to do?
You could post a picture of the area for us to examine. An easier way would be to find the blower motor connector (yes behind the glove box) then follow those wires to the first unit it comes to. That would be your resistor/controller. If you have manual heat control you have a resistor block. If you have automatic temp control you have a solid state controller.
You could post a picture of the area for us to examine. An easier way would be to find the blower motor connector (yes behind the glove box) then follow those wires to the first unit it comes to. That would be your resistor/controller. If you have manual heat control you have a resistor block. If you have automatic temp control you have a solid state controller.
Last edited by Cougar41; 11-09-2012 at 03:12 PM.
#4
#5
#7
Trending Topics
#8