BlowerMotorResistor
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 12
Likes: 0
BlowerMotorResistor
My number 2 setting for the blower quit working the other day, the other three still works. I know it's the blower motor resistor for I've changed the one on my 02 Jeep Liberty before also. Just wondering if anybody out there know of where in our 4th Gen Ram is it located at? The usual place is behind the glove box but I dont want to start taking it apart if i'm looking at a wrong part. I just need confirmation that that's where it's suppose to be. Thanks in advanced!
Record Breaker
Joined: Jan 2010
Posts: 1,400
Likes: 5
From: San Pedro, California
This site has the wiring diagrams for years 2010-2014
https://techauthorityonlinedemo.extr...ew/classic.htm
Once you get there, enter the year, model and engine. Since you did not specify your truck, I entered 2010, ram with a hemi. This will get you a window on the left side, click on the HVAC SYSTEM - MTC (for the manual version) and select diagram. When the rendition loads, look all the way down about the middle and you will see a box for the resistor assy. Click on the box once and you will get another window with 4 options, select "show location view". This will show you where it is within the dash.
https://techauthorityonlinedemo.extr...ew/classic.htm
Once you get there, enter the year, model and engine. Since you did not specify your truck, I entered 2010, ram with a hemi. This will get you a window on the left side, click on the HVAC SYSTEM - MTC (for the manual version) and select diagram. When the rendition loads, look all the way down about the middle and you will see a box for the resistor assy. Click on the box once and you will get another window with 4 options, select "show location view". This will show you where it is within the dash.
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 12
Likes: 0
oops
Oh sorry I was just in a hurry. I have an 09 Ram 1500 ST Crew Cab. Obviously don't have an automatic climate. The website would not load. Thanks though
Last edited by Goofster08; Aug 5, 2014 at 10:59 AM.
Record Breaker
Joined: Jan 2010
Posts: 1,400
Likes: 5
From: San Pedro, California
What system are you using? I'm using windows 7 and just clicked on the link of my post and it loaded for me. maybe try to cut and paste to your browser. I use mozilla, but I tried it with explorer and chrome and it loaded ok. Anyway, it looks like its over towards the glove box on the middle side of it. I don't know if just removing the center console and then following the switch wiring harness will get you there, may be worth a try.
Veteran
Joined: Dec 2011
Posts: 318
Likes: 1
From: Rochester, New York
Since I've had the dash apart on my 2010, I think I remember seeing it on the bottom of the blower motor.
Just looked at my 2014 and they've added a panel just below the lower glove box so I can't see up there. Nighttime here. Sorry.
Regards,
Dusty
2014 Ram Big Horn 1500 Quad Cab 2WD, 5.7 Hemi, 8HP70, 3.92 LSD, factory dual exhaust, 20” wheels. Now at: 005200 miles.
Just looked at my 2014 and they've added a panel just below the lower glove box so I can't see up there. Nighttime here. Sorry.
Regards,
Dusty
2014 Ram Big Horn 1500 Quad Cab 2WD, 5.7 Hemi, 8HP70, 3.92 LSD, factory dual exhaust, 20” wheels. Now at: 005200 miles.