6.1 Hemi SRT Plymouth Prowler- with a lot of Dodge DNA
13 Attachment(s)
Whats good Dodge Forum
Well I took a look at your site. I luv dodge cars, any thing Mopar especially with a Hemi and like many of the V6 guys always wanted to make it a bit faster. So I thought I stop by an share my story. I saw a bunch of your guys at Carlisle when I was on the Dodge showcase Just to provide some context this is the worlds first and only 6.1 SRT Hemi Prowler Think a SRT 6.1 at about 2850Lbs My car was featured at this years Chrysler nationals and Modern mopar. so you may have seen it. My site is www.facebook.com/hemiprowler Backstory I had a Prowler for over 12 Years. Back in the day the 3.5 was pretty nice but also wanted it to be a bit more of a modern hot rod. With the modern day Hemi decided to make a move. Now doing this swap in a Prowler is no easy task. Its pretty much a custom build took over 12 months and involves a ton of fabication, electronics and patience to make it all work. The heart of the Hemi has a bolt on Trans and the prowler Tran set up is in the rear. The build is pretty detailed and the great folks over at Allpar put a nice article together below that walks through all of the key details of the project. click below SRT Prowler Project: Plymouth with 6.1 Hemi V8 Engine I will put some of the key build picts below and look foward to seeing my fellow mopars on the street. You can see all of the videos and details also on www.facebook.com/hemiprowler Original Car before build Attachment 38563 Last picture the car as a V6 Attachment 38564 V6 pulled Attachment 38565 First ever engine drop in of new 6.1 hemi Attachment 38567 This is a big motor Come to papa Attachment 38569 Drop it in Attachment 38570 It's in there and yes it fits Attachment 38572 |
6 Attachment(s)
Pictured here is our custom bell-housing engine adapter to adapt the 6.1 Hemi engine to accept the prowler style drive shaft an rear trans. The rear engine mount is also integrated into the bell-housing.
Attachment 38557[/IMG] Attachment 38558 Attachment 38559 Modified pan [IMG][http://i139.photobucket.com/albums/q290/treyb1/Trey%20B%20SRT8%2061%20prowler%20project/prowler%20hemi%20in%20progress/552bf81e.jpg[/IMG] Handbuilt headers and exhaust Attachment 38560 Custom shaker hood from a Challenger The first step was a custom trim ring. On the picture below you will see a aluminum ring around the shaker. This set the positioning and build up area that the shaker with come through from the engine. Attachment 38561 Then using tape the team laid out the build up outline design form the custom aluminum piece to be built, formed and attached to the hood. As you can see its slopes only leaving the top of the shaker sticking through. Very creative. See side view [IMGhttp://i139.photobucket.com/albums/q290/treyb1/Trey%20B%20SRT8%2061%20prowler%20project/04299455.jpg[/IMG] Hand built to match the shaker Attachment 38562 |
10 Attachment(s)
Chrysler nationals Reveal
Attachment 38547 Attachment 38548 Attachment 38549 Attachment 38550 Treyb 11-11-2012, 12:59 AM Live on the dodge stage Here a few more of my favorite Picts for many that never saw it ! You can watch the full Interview with SRT and Dodge here from the reveal Custom Prowleron DODGE - live streaming video powered by Livestream Attachment 38551 http:///i139.photobucket.com/albums/...r/962d3e43.jpg Attachment 38552 Attachment 38553 Attachment 38547 Attachment 38555 Attachment 38556 |
I love this car. This is how every Prowler should have been built!
This has been feature as today's "Cool Thread" on the DF front page. |
Nice. Supercharger time.
|
That really looks awesome. Too bad they didn't build it that way from the beginning!!!!
|
wow looking very strong sport:icon_hyper:
|
I aso love this car very much.
|
All times are GMT -4. The time now is 04:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands