AFE intake and Edge juice
#1
10-26-2005, 12:08 AM
Join Date: Sep 2005
Location:
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
AFE intake and Edge juice
Today I got my AFE stage 2 intake with proguard 7 and edge juice with attitude monitor, yeah
But it rained all day, and I didn`t get the chance to put them in[:@]. I plan to tomorrow. Anyway, I was wandering what you guys are using and your experiences. I will post mine also.
But it rained all day, and I didn`t get the chance to put them in[:@]. I plan to tomorrow. Anyway, I was wandering what you guys are using and your experiences. I will post mine also.
#2
10-26-2005, 12:12 AM
RE: AFE intake and Edge juice
I have an Airaid intake and the Edge Juice w/attidude in-cab. All I can say is, it sucks! My MPG drops from 18.5 to 16, even on "Mileage" mode and when I punch it, it smokes. I now have it set to stock and I am happy with it. The worst 1100$ I spent, better off with the Banks Big Hoss.
Cheers,
Lee
Cheers,
Lee
#3
10-26-2005, 12:17 AM
Join Date: Sep 2005
Location:
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
#4
10-26-2005, 01:28 AM
#5
10-26-2005, 10:26 AM
RE: AFE intake and Edge juice
still stock[:@]
but I am looking at either a Van Aaken C3.2, TST, or a power pup.
from my looking around of the internet the timeing/duration boxes are better for the actual mechanical end of the truck since you are not actualy increasing pump pressure that may lead to pump failure or the high pressure valve to fail. if you get a timeing/duration box they are better quality to start with, plus all you are doing is altering the injector pulse width and time of actual opening which does not harm the mechanical end.
but I am looking at either a Van Aaken C3.2, TST, or a power pup.
from my looking around of the internet the timeing/duration boxes are better for the actual mechanical end of the truck since you are not actualy increasing pump pressure that may lead to pump failure or the high pressure valve to fail. if you get a timeing/duration box they are better quality to start with, plus all you are doing is altering the injector pulse width and time of actual opening which does not harm the mechanical end.
#6
10-26-2005, 06:53 PM
RE: AFE intake and Edge juice
i have an 04.5 Cummins 600 with an Airaid intake, straight pipe and a VanAaken Smart box (C3.2). the box has 3 levels - off, middle, full blast. i run daily on the middle setting and get about 16 MPG like that( i drive it like it wants to be driven). turned up, there is a huge power increase measured by the butt dyno and the spinning tires. it does smoke, but that is part of the over fueling game.
#7
10-29-2005, 12:34 AM
Join Date: Sep 2005
Location:
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts