DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   Dodge Ram SRT-10 (https://dodgeforum.com/forum/dodge-ram-srt-10-36/)
-   -   Questions about the SRT's (https://dodgeforum.com/forum/dodge-ram-srt-10/186465-questions-about-the-srts.html)

Razorbackfan Jan 18, 2009 02:55 AM

Questions about the SRT's
 
Soon I'm going to be looking for an SRT truck. I was just curious as to what to look for when test driving.

I have narrowed it down to an '05 quadcab. I like having the back seat and the '05 has the flipup center console where the '06 doesn't. Plus the headlights are a little big.

What is the smallest rim size that will fit?

Thanks.

CarGuyOhio Jan 19, 2009 08:30 PM

Never asked what the smallest rim that will fit.... I know you need 18s for the back, you can run 17s if you shave the calipers a little. But I am not sure about the front and not home to measure. Not sure why you would want anything less than 20 anyhow. You have to keep a low profile tire if you want any kind of performance at all and with the small rim it will leave a big gap in the wheel wells.

The QC will seem almost disappointing when you drive it if the truck is stock. The auto tranny and detuned PCM are the reasons.

Make sure it shifts OK under power. I would also go after one that not has towed anything. Other than that there is not much to watch for on 05 QCs.

Razorbackfan Jan 19, 2009 09:07 PM

20's were the size I was wondering about. I guess I could've said 20's instead of smaller. I was hoping to get a stock one then modify it as I go.
Can you reprogram the PCM to the level of the regular cab?

scatpack_69 Jan 20, 2009 12:44 AM

15 inch front rotors right? Gotta figure in the caliper size. Id say 20s minimum to be safe. But it does depend on the wheels. Maybe be able to fit 18s up front, but I doubt it.

I know on my truck, Ive seen 16.5s and they have 13 in. rotors. Theres 3.5" and they barely cleared. Same logic on 15" rotors is 19", but Id bet the calipers are bigger on the SRT.

CarGuyOhio Jan 20, 2009 08:24 AM


Originally Posted by Razorbackfan (Post 1517602)
20's were the size I was wondering about. I guess I could've said 20's instead of smaller. I was hoping to get a stock one then modify it as I go.
Can you reprogram the PCM to the level of the regular cab?

PCM flash is a must on a QC and many places will do it. I would not get it done though until you have all your other planned mods done.

OSO Jan 26, 2009 11:24 PM


Originally Posted by Razorbackfan (Post 1515729)
Soon I'm going to be looking for an SRT truck. I was just curious as to what to look for when test driving.

I have narrowed it down to an '05 quadcab. I like having the back seat and the '05 has the flipup center console where the '06 doesn't. Plus the headlights are a little big.

What is the smallest rim size that will fit?

Thanks.

Not sure if your still looking but the guy that just bought my srt8 is looking to dump his 05 QC for 18,500 31k miles. If you need more info let me know.

Razorbackfan Apr 28, 2009 07:26 PM

As most of you already know I bought the '05 I was looking for. I'm on the VTCOA and I recognize a couple out of this thread. I did get a bone stock one but as he just put brand new tires on before I got it, I'll be leaving the 22's on for now. Thanks again for the things to look for.

Jeff

CarGuyOhio Apr 28, 2009 08:16 PM

Now all you have to do is mod, drive and mod.

Midnight Runner May 14, 2009 07:39 PM

Congrats on the truck. You will have fun.


All times are GMT -4. The time now is 03:18 PM.


© 2026 MH Sub I, LLC dba Internet Brands