AC ISSUES 96 B2500 van
so, I turn my AC on and it blows from the top for a few minutes and then on the bottom. Usually stays blowing towards the floor if I have set on max. if I set it on vent or push/pull, it will usually start blowing through the vents after about 5 minutes. Anyone have any idea why this is? It just started happening a couple weeks ago. |
Probably a vacuum leak. |
Ditto on the vacuum leak. It's a leak and not a clean break because if it was a clean break the air would come out the defrost only, no matter how much time passed. There's a vacuum hose that runs from the intake manifold over to the vacuum reservoir located behind and below the passenger headlight. Then a second hose off the reservoir runs through the firewall. This is the vacuum line that ends up supplying the HVAC controls.
|
Originally Posted by alloro
(Post 3386745)
Ditto on the vacuum leak. It's a leak and not a clean break because if it was a clean break the air would come out the defrost only, no matter how much time passed. There's a vacuum hose that runs from the intake manifold over to the vacuum reservoir located behind and below the passenger headlight. Then a second hose off the reservoir runs through the firewall. This is the vacuum line that ends up supplying the HVAC controls.
Could I do it myself? its about to get hot here in Texas!! ahahaha |
Just need to find where it leaks. :)
|
All times are GMT -4. The time now is 09:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands