Has anyone had success programming a 2 button factory remote? All of the instructions I can find online refer to a remote with a "panic" button, mine doesn't have one.

I do have one a working one.

Thanks!

-Andrew

2002 Dodge Ram Van 3500 5.9l

 

1. Place the key in ignition and turn the key to the on position (do not start the engine.) 2. Press and hold the Unlock button on the transmitter for four to ten seconds. 3.While the Unlock button is pressed, press the Lock button on the transmitter and release both buttons. You will hear single chime when the programming is completed. This according my owners manual for a 2001 Dodge Ram 5.2. This may work for you.