DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   Dodge Stratus (https://dodgeforum.com/forum/dodge-stratus-30/)
-   -   96 Stratus won't start, no spark, does get gas (https://dodgeforum.com/forum/dodge-stratus/271264-96-stratus-wont-start-no-spark-does-get-gas.html)

Imre Dec 6, 2010 08:53 AM

96 Stratus won't start, no spark, does get gas
 
Hi!

I'm here in Budapest, it's been unusually cold, well below freezing -- the first below freezing morning car was hard to start, simply cranked and nothing for a bit, then started to catch and came on.

Then I parked it for a couple of below freezing days and it just cranks -- gets fuel but no spark.

Fuses seem OK -- didn't pull them, just appear not blown.

96 Stratus 2.5 V6

Any ideas?

Thanks in advance for your help.

Best,

Imre

master tech Dec 6, 2010 11:35 PM

Check the wires going to the crank sensor. And here is something i tried here,blow dryer on the PCM.

Imre Dec 7, 2010 06:21 AM

thanks Master Tech!

Will try, car is down the street, I live of a hill and... well, will let you know.

Imre

Imre Dec 7, 2010 06:25 AM

Basic question: what's the easiest way to see the crank sensor and where is the PCM?

Thanx,

Imre

Imre Dec 7, 2010 08:04 AM

Is the PCM under the hood, at the fuse box, next to it on the left side? Is there a simple test for it?

As for crank sensor, is it at the bellhousing? I didn't have a flashlight, pretty small and dark area, do I have to remove much to get to it? Is there an easy way to check it?

Another warmer day tomorrow forcasted, hopefully the snow will be melted and I'll remove them.

Thanks again,

Imre

master tech Dec 7, 2010 11:28 PM

The crank sensor is bolted to the transmission bellhousing, and the PCM would near the black box (PDC).

Imre Dec 8, 2010 05:08 AM

Thanks Master Tech!

Does the PCM have an aluninum casing?

Imre

PS: That's a mighty, and I mean mighty, fine V10 !!


All times are GMT -4. The time now is 09:37 PM.


© 2026 MH Sub I, LLC dba Internet Brands