When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello. I have just replaced the front rotors, calipers and pads. Also bleed them. I have no pedal now, at least not while the car is running. Any ideas on what else I could check.
Appreciate any help.
Thanks,
I had a similar problem when I replaced my rear calipers. I discovered I didn't tighten the banjo bolt (brake line to caliper) to 35 foot pounds, and it sucked in air into the brake lines. Once properly tightened I was able to bleed them and got a good pedal pump. You may still have air in the lines. Good luck!