DodgeForum.com - Search Results

Go Back  DodgeForum.com > Search Forums
Reload this Page >

Search Results

 
Search: Posts Made By: 00DakDan
Showing results 1 to 25 of 498
Search took 0.06 seconds.
Yesterday, 10:04 PM
Replies: 5
Views: 321
Posted By 00DakDan

How long the clutch lasts depends upon the driver...

How long the clutch lasts depends upon the driver and type of driving. If stop and go, it won't last nearly as long as all highway.

On mine, I had to replace the clutch at about 120k due to the...
Yesterday, 10:01 PM
Replies: 5
Views: 196
Posted By 00DakDan

I think Magnethead nailed it. It's definitely...

I think Magnethead nailed it. It's definitely thermal.

The ignition timing and fuel injection are dependent upon the cam/crank position sensors. Without them, the engine won't run well, if at...
Yesterday, 09:37 AM
Replies: 5
Views: 196
Posted By 00DakDan

No bus is just that. The computers, PCM, CTM,...

No bus is just that. The computers, PCM, CTM, ABS, Cluster, etc., can't talk to each other.

A common issue is a bad/shorted Crank or Cam position sensor on the 5v supply from the PCM.

What...
05-29-2019, 08:22 PM
Replies: 5
Views: 393
Posted By 00DakDan

Sounds like a ctm issue. It controls the...

Sounds like a ctm issue. It controls the headlights and the tone generator.
05-27-2019, 07:25 PM
Replies: 47
Views: 5,233
Posted By 00DakDan

Every time I change the differential gear oil I...

Every time I change the differential gear oil I find metal. I'd pull the cover.
05-27-2019, 10:21 AM
Replies: 7
Views: 686
Posted By 00DakDan

There is the starter relay, little click, or the...

There is the starter relay, little click, or the starter solenoid (integral), much louder click.

Both are part of the control circuit - ignition key.

The neutral safety switch is part of the...
04-15-2019, 01:22 PM
Replies: 19
Views: 866
Posted By 00DakDan

They are on our site: Factory Service...

They are on our site:

Factory Service Manuals (https://dodgeforum.com/forum/2nd-gen-dakota-tech/70233-2000-factory-service-manual-pfd-download.html)
04-14-2019, 10:04 PM
Replies: 19
Views: 866
Posted By 00DakDan

Through the PDC. Attached are the diagrams.

Through the PDC. Attached are the diagrams.
04-13-2019, 08:45 PM
Replies: 8
Views: 569
Posted By 00DakDan

You can download the manual here:...

You can download the manual here: https://dodgeforum.com/forum/2nd-gen-dakota-tech/70233-2000-factory-service-manual-pfd-download.html
04-13-2019, 08:44 PM
Replies: 3
Views: 366
Posted By 00DakDan

No. The boneyards around here did not have the...

No. The boneyards around here did not have the pigtail.

I think your idea will work.
04-13-2019, 08:42 PM
Replies: 19
Views: 866
Posted By 00DakDan

Pin 30 is good, it should be 12 volts. When you...

Pin 30 is good, it should be 12 volts. When you jumped it you would have applied power to the feed to the lights.

Are the front lights working???

Somewhere you have a break in the circuit...
04-11-2019, 01:56 PM
Replies: 3
Views: 366
Posted By 00DakDan

Not sure on your '01 but my '00 did not have the...

Not sure on your '01 but my '00 did not have the radio side harness. It did have the cruise harness.
04-11-2019, 10:09 AM
Replies: 19
Views: 866
Posted By 00DakDan

Yes, there are front marker lights. They are in...

Yes, there are front marker lights. They are in the amber part around the headlights - where the turn signals are. I take it they DO NOT work either. How about the license plate lights?

Since...
04-10-2019, 01:33 PM
Replies: 19
Views: 866
Posted By 00DakDan

Forget about the headlights. They are on an...

Forget about the headlights. They are on an entirely different circuit. Are the front marker lights working?

The joint connector in the PDC is the supply. The chassis is the ground.

Odds...
04-10-2019, 12:09 PM
Replies: 1
Views: 300
Posted By 00DakDan

There are multiple circuits on the ignition...

There are multiple circuits on the ignition switch so it is very possible for some things to work and others not.

Sounds like it's time to replace it. It's not that difficult. The switch and...
04-10-2019, 12:04 PM
Replies: 2
Views: 313
Posted By 00DakDan

Yes that's all you'd need for the hardware...

Yes that's all you'd need for the hardware install.

One thing to consider is that the proportioning valve in your truck is set up for the 9" brakes. The antilock should keep the rears from...
04-10-2019, 11:59 AM
Replies: 19
Views: 866
Posted By 00DakDan

Just to clarify, are ALL of the running lights...

Just to clarify, are ALL of the running lights not working? Front and back or just the back?

If you hear the park lamp relay click then you can rule out the CTM, switch, and the fuse. The same...
04-05-2019, 03:42 PM
Replies: 6
Views: 484
Posted By 00DakDan

Just be aware that not all bolts are the same...

Just be aware that not all bolts are the same grade/quality. You need to find similar strength fasteners.

Maybe the dealer? I know it's not cheap but neither is having the suspension fail.
...
04-05-2019, 03:35 PM
Replies: 2
Views: 284
Posted By 00DakDan

I'd second the switch. Unfortunately, you...

I'd second the switch.

Unfortunately, you can't adjust the switch after initial installation - according to the manual. It's an easy replace though.
04-05-2019, 10:34 AM
Replies: 19
Views: 866
Posted By 00DakDan

Are the front marker lights working? They are on...

Are the front marker lights working? They are on the park lamp relay as well. If yes, you can rule out the fuse, relay, switch, and CTM.
The CTM controls these via the park lamp relay.

Can you...
03-22-2019, 01:44 PM
Replies: 4
Views: 762
Posted By 00DakDan

The forum does seem to be slowing down a bit but...

The forum does seem to be slowing down a bit but those that remain are a wealth of knowledge.

As to the PCM, you'd need one from an '01. Earlier models use a completely different computer bus and...
03-22-2019, 01:36 PM
Replies: 5
Views: 368
Posted By 00DakDan

There's a lot more to replacing the bearings than...

There's a lot more to replacing the bearings than pulling the cover. You'd need to pull the brakes, etc to pull the axles.

My opinion, leave them alone.

If they aren't noisy they're probably...
03-12-2019, 09:43 PM
Replies: 9
Views: 530
Posted By 00DakDan

Power is supplied for the system via the PCM. ...

Power is supplied for the system via the PCM.

Does the horn work? The switches run through the clockspring and it can fail.

Is the brake light switch properly adjusted/working. There is a...
03-08-2019, 09:04 AM
Replies: 1
Views: 375
Posted By 00DakDan

Most everything is on the CCD bus. The PCM, The...

Most everything is on the CCD bus. The PCM, The CTM, the cluster, the antilock brake controller (speed sensors), airbag system, etc.
The PCM is potted. But, given the amount of time and heat...
02-28-2019, 10:13 AM
Replies: 5
Views: 474
Posted By 00DakDan

Start with the basics. How's the fuel pressure? ...

Start with the basics. How's the fuel pressure? Low fuel pressure could do just what you describe. Do you have a good spark?

You might want to invest in a noid light too, just to see if the...
Showing results 1 to 25 of 498
 


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.