2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Questions on lowering 2wd sport

Thread Tools
 
Search this Thread
 
Old Nov 12, 2017 | 06:03 PM
  #1  
Mopar9611's Avatar
Mopar9611
Thread Starter
|
Registered User
Joined: Nov 2017
Posts: 2
Likes: 0
Default Questions on lowering 2wd sport

Hey all, I am new to the forum but not the dodge community. I have a 96 ram 2wd sport 2 door and looking to do a drop on it. My buddy has a set of the ss/t wheels and wondering if they would fit my truck no problem because of my front hubs. What 2/4 drop kit is recommended for a complete and overall solid kit? My next question is if the ss/t wheels fit what tire size would be ideal with the drop without looking goofy? Thanks in advance
I've been searching alot but hard to find answers since not many of you guys lower these trucks.
 
Reply
Old Nov 13, 2017 | 12:48 PM
  #2  
Tboned's Avatar
Tboned
Rookie
Joined: Oct 2016
Posts: 94
Likes: 0
Default

Just did a 2 /4 drop on my 1996 indy. Mine came stock with SST wheels so should fit yours. Front was 2" drop springs . Rear was flipping the front spring perch and longer shackles in rear.

 

Last edited by Tboned; Nov 15, 2017 at 06:46 AM.
Reply
Old Nov 14, 2017 | 10:39 AM
  #3  
Mopar9611's Avatar
Mopar9611
Thread Starter
|
Registered User
Joined: Nov 2017
Posts: 2
Likes: 0
Default

Are you running the stock tire size? 275/60r17
 
Reply
Old Nov 15, 2017 | 06:46 AM
  #4  
Tboned's Avatar
Tboned
Rookie
Joined: Oct 2016
Posts: 94
Likes: 0
Default

Sure am. I would have done drop spindles but wont work with these 17" wheels.

 

Last edited by Tboned; Nov 15, 2017 at 06:48 AM.
Reply




All times are GMT -4. The time now is 05:03 AM.