Need bolt size, please!
#1
Need bolt size, please!
So, a while back I removed the front drive shaft on my 2004 Dakota 4x4 SXT to replace the CV joint where it bolts up to the transfer case. Like an idiot I misplaced the 4 bolts that attach the flange on the front end of it to the front differential flange before I was able to get it reinstalled. Dodge wants $5-6 EACH for those 4 bolts, so I'm wondering if anyone can provide the thread size and pitch so I can pick up some grade-8 bolts at the hardware store. This info would be MUCH appreciated!
#3
#4
Try and download a parts manual for your truck they usually show the bolts needed but you may need to convert what they show.
https://dodgeforum.com/forum/2nd-gen...s-manuals.html
https://dodgeforum.com/forum/2nd-gen...s-manuals.html
#5
Try and download a parts manual for your truck they usually show the bolts needed but you may need to convert what they show.
https://dodgeforum.com/forum/2nd-gen...s-manuals.html
https://dodgeforum.com/forum/2nd-gen...s-manuals.html