3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Truck cranks, but will not run.

Thread Tools
 
Search this Thread
 
  #1  
Old 11-19-2018, 01:30 AM
C0llin.e's Avatar
C0llin.e
C0llin.e is offline
Registered User
Thread Starter
Join Date: Sep 2018
Location: Texas
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Truck cranks, but will not run.

Hello, I have a 2008 Dodge Ram 1500 TRX4 5.7 HEMI.

I was about to leave my girlfriend's last night and my truck would crank, but would not start running. I connected my tuner to it and it came up with "Fuel Pump Circuit 2 Open." I assumed it was a fuse or relay, and check all the ones in my fuse box. All of them seemed to be in good condition. Does anyone have any tips?
Thank you!
 
  #2  
Old 11-19-2018, 06:06 AM
jrsick's Avatar
jrsick
jrsick is offline
All Star
Join Date: Mar 2006
Location: Chesapeake, VA
Posts: 833
Received 67 Likes on 65 Posts
Default

Can you hear the fuel pump run when you turn the key to the accessory position? If you do, then the pump is probably providing fuel pressure.
Sounds like a crankshaft position sensor to me.
 
  #3  
Old 11-19-2018, 08:52 AM
C0llin.e's Avatar
C0llin.e
C0llin.e is offline
Registered User
Thread Starter
Join Date: Sep 2018
Location: Texas
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

No sir, the fuel pump is not clicking.
 

Last edited by C0llin.e; 11-19-2018 at 08:57 AM.



Quick Reply: Truck cranks, but will not run.



All times are GMT -4. The time now is 03:16 AM.