2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

engine problems

Thread Tools
 
Search this Thread
 
  #1  
Old 07-23-2019, 05:45 AM
wheily's Avatar
wheily
wheily is offline
Professional
Thread Starter
Join Date: Jul 2018
Location: oregon
Posts: 156
Received 4 Likes on 4 Posts
Default engine problems

well my truck has had a cylinder #2 miss fire code that has gone away on its own...then it started chugging/miss fire on start up (sound like it flooded) but would clear up with in a few seconds...now it started surging under load at half throttle and pings every once and awhile (only drove 2 days like this )...well i checked live data on way home from work and my tps always reads 12 to 21 percent evan if wide open so i figure tps is bad but i also noticed the spark advance was jumping to 45 when cruzing is that normal and could there be some thing else wrong ? thanks
 
  #2  
Old 07-23-2019, 08:55 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,749
Likes: 0
Received 3,177 Likes on 2,930 Posts
Default

What year is your truck? What engine?
 
  #3  
Old 07-23-2019, 11:01 AM
ZEN357's Avatar
ZEN357
ZEN357 is offline
Veteran
Join Date: Feb 2018
Posts: 408
Likes: 0
Received 6 Likes on 6 Posts
Default

Could be a spark plug, coil pack or the TPS.
 
  #4  
Old 07-23-2019, 03:49 PM
wheily's Avatar
wheily
wheily is offline
Professional
Thread Starter
Join Date: Jul 2018
Location: oregon
Posts: 156
Received 4 Likes on 4 Posts
Default

its a 99 4x4 3.9 engine...also it had a tune up about 3000 miles ago ..plugs, wires, cap and rotor....it also has an accel coil that previous owner installed
 

Last edited by wheily; 07-23-2019 at 05:16 PM.
  #5  
Old 07-23-2019, 08:36 PM
magnethead's Avatar
magnethead
magnethead is offline
Legend
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 7,935
Received 153 Likes on 140 Posts
Default

timing is based on TPS, IAT, and RPM. Yes 45 is normal. replace the TPS
 
  #6  
Old 07-24-2019, 06:04 AM
wheily's Avatar
wheily
wheily is offline
Professional
Thread Starter
Join Date: Jul 2018
Location: oregon
Posts: 156
Received 4 Likes on 4 Posts
Default

thanks for responses i installed new tps and shes running good other than the weird mis/chug when first started after its sat
 
  #7  
Old 07-24-2019, 08:40 PM
magnethead's Avatar
magnethead
magnethead is offline
Legend
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 7,935
Received 153 Likes on 140 Posts
Default

Originally Posted by wheily
thanks for responses i installed new tps and shes running good other than the weird mis/chug when first started after its sat
You might have an injector leaking/dripping or locking up, causing a momentary rich or lean condition at start
 
  #8  
Old 07-25-2019, 05:50 AM
wheily's Avatar
wheily
wheily is offline
Professional
Thread Starter
Join Date: Jul 2018
Location: oregon
Posts: 156
Received 4 Likes on 4 Posts
Default

ok thanks ..i acually have 1 new injector that i bought when the miss fire code popped up but then i thought to my self dont be a tightwad replace them all and im just waiting on them to come in
 



Quick Reply: engine problems



All times are GMT -4. The time now is 09:29 PM.