Dodge01hgm's Avatar
Dodge01hgm
Thread Starter

Dodge Vans & CUVs / Dodge Ram Van    Today 06:07 PM

Ya, there are expensive, I guess that's why no one is chiming in.

0 Reply
steve05ram360's Avatar
steve05ram360
Thread Starter

Dodge Dakota / 2nd Gen Dakota Tech    Today 05:35 PM

"Bring out your dead... " came across this thread today and found I never updated it with the root cause & solution. Found this out at the pump, suspected a leak at the top of the fuel tank...

0 Reply

Dodge Dakota / 2nd Gen Dakota Tech    Today 04:30 PM

Is that for the durango? (same mounting, larger fan iirc)

0 Reply
TheRinky's Avatar
TheRinky
Thread Starter

Dodge Dakota / 1st Gen Dakota Tech    Today 03:02 PM

A couple of things,I tried it 4 times all the same, it threw 2 codes, a 12, yes a 12, 1 flash, space, 2 flashs. A 13 is the map. Then it shows a 23. Air charge temp, voltage too hi or low. Then a...

0 Reply

Dodge Vans & CUVs / Dodge Ram Van    Today 08:03 AM

Are you getting power OUT of the multi-function switch? Rear lights are simple circuits, with very little in common, aside from the power source..... There are a selection of splices in the rear...

1 Reply

Dodge Dakota / 1st Gen Dakota Tech    Today 05:36 AM

https://cimg9.ibsrv.net/gimg/dodgeforum.com-vbulletin/720x1600/jba_headers_f7267b0a f66b0451b5883c5a11c5 b02041686059.jpg I'm very late to this post but I tried these on my 95 2wd Dakota.These are for...

0 Reply
GumbyRT's Avatar
GumbyRT
Thread Starter

Dodge Ram / 4th Gen Ram Tech    Yesterday 10:14 PM

SHO Rod
Are you able to monitor manifold pressure just prior to the stalling? Does it also stall if you cost to a stop rather than brake to a stop? I wonder if you have a vacuum leak and when applying...
Thanks for the reply. I did forget to mention that I replaced the throttle body a couple of weeks ago. I’d found enough play in the throttle plate that I thought it could’ve been getting pulled...

0 Reply

All times are GMT -4. The time now is 07:55 PM.