belt tensioner replacement
#1
belt tensioner replacement
I'm trying to find a diagram to replace the belt tensioner in my 1999 5.2 L Dodge Durango. Anyone know where I can get a diagram and instructions without have to pay anything? If I can't do it myself, I have a friend that is a mechanic that can do it but I haven't had my vehicle for over a week and am going crazy. Please help if you can! Thanks
#2
https://dodgeforum.com/forum/dodge-d...s-section.html
ill move this the first generation section, check the FAQ thread for the FSM, its there (its the same as the 98)
ill move this the first generation section, check the FAQ thread for the FSM, its there (its the same as the 98)
#4
go here https://dodgeforum.com/forum/1st-gen...wers-faqs.html
scroll down, near the bottom::
Direct Link to Download a 2002 Durango Service Manual
http://www.mediafire.com/?2cg2hgim2zz
a little closer to the bottom::
Downloads of Information and Durango Service Manuals
Courtesy of shrpshtr325
http://www.mediafire.com/?sharekey=c...b5ba589d1986ba
https://dodgeforum.com/forum/1st-gen-...ilability.html
Downloads of DurangoParts Manuals
http://www.mediafire.com/?jh24tgfi6i694
scroll down, near the bottom::
Direct Link to Download a 2002 Durango Service Manual
http://www.mediafire.com/?2cg2hgim2zz
a little closer to the bottom::
Downloads of Information and Durango Service Manuals
Courtesy of shrpshtr325
http://www.mediafire.com/?sharekey=c...b5ba589d1986ba
https://dodgeforum.com/forum/1st-gen-...ilability.html
Downloads of DurangoParts Manuals
http://www.mediafire.com/?jh24tgfi6i694
#5
This is very easy to do. you will need a open end wrench to place on the nut radiator side of the pulley moving this releases the tension and you can remove the belt. Before doing this take a picture and just memorize the directions the belt went (not that hard). release the tension and slid the belt to the side DO NOT REMOVE IT. then on do the bolts holding the tensioner on and replace with the new on (it can only go on in 1 direction so no worries) then using the picture or memory release the tension on the tensioner and replace the belt. Now enjoy your D...
I have a 99 and replaced mine already so when I say it is easy it is.
I have a 99 and replaced mine already so when I say it is easy it is.