You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
alirght so im out and ive cut my air horns off my tb and im working on the rest of it and i was just wodnering how to i get the shaft out of it? ive alread taken the butterfly plates off now i just need to get the shaft out...help would be appreciated!
This ad is not displayed to registered and logged-in members. Register your free account today and become a member on Dodge Forums!
just grad the shaft on the throttle line hook up(oppsite side of the tps) and pull it out,,, i will feel like it will not at frist but it will, it a little hard at frist but it will, make sure you have room you don't hit no thing with you arm.
well i got it out with a good tug, there was just to much crap in t he way..but its out, i removed the fins and i worked on smoothing it more tonight, and tomorrow im going to my dads shop to bore it and thin out my butterfly plates...
doin the TB mod
