Want a new cam!!!
#1
Want a new cam!!!
Hey guys, any advice/ideas on what kind of cam i should upgrade to, or how much lift would be good. Its a daily driver but i try and go to the track as much as possible, but still not puttin up the times i want. So far ive got eddlebrock headers and full custom exhaust that dumps out just behind the cab, bullydog programmer, and AEM CAI w/ throttle body spacer. I dont care about gas mileage or tranny problems. Already replaced one. Its a '06 single cab with the hemi and 3.93's. Already got the valve springs, retainers, and push rods ready for order. Any help would be great thanks!!!!!
#2
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes
on
19 Posts
4x2, Lower weight reg cab, track times, you really just need to consider a Comp 268 or even better a KRC 218.
Now with the headers, if you did 4.56 gears and/or a higher stall converter, you could go with a KRC 223. Easy 420+ RWHP, but needs a custom tune and maybe just a little "tweaking" if you want it to "behave" on the street...
Now with the headers, if you did 4.56 gears and/or a higher stall converter, you could go with a KRC 223. Easy 420+ RWHP, but needs a custom tune and maybe just a little "tweaking" if you want it to "behave" on the street...
Last edited by HammerZ71; 01-29-2009 at 11:05 PM.