Need Help with Fuel Injector voltage circuit DTCs - DodgeForum.com

Go Back   DodgeForum.com > Dodge Trucks > Dodge Ram > Dodge/Ram Diesel
Log In 


Dodge/Ram Diesel Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Need Help with Fuel Injector voltage circuit DTCs

Reply
 
 
 
Thread Tools Search this Thread
  #1  
Old 09-14-2011, 01:23 PM
BullRhino BullRhino is offline
Registered User
 
Join Date: Sep 2011
Posts: 2
Default Need Help with Fuel Injector voltage circuit DTCs

I have 2004.5 RAM 2500 w/Cummins (of course). Has an Edge EZ chip that came with it from previous owner. Coming back from errand this AM and truck started running terrible and check engine light was on. Checked DTCs and got P2146 "Fuel injector Group 1 supply voltage circuit/open" and P0202 "Fuel injector 2 circuit/open".

Could this be from the chip? I recently filled up and added "Power Source Diesel Kleen + Cetane Boost" to the fuel.

Any suggestions and help would be greatly appreciated.

OBTW I am a total amateur at this so if you are going to tell me to do something more complicated than unplug the chip then please help me with detailed instructions or a link to someplace where I can get detailed instructions even including photos if possible. THANKS!!!

Last edited by BullRhino; 09-14-2011 at 01:37 PM.
Reply With Quote
  #2  
Old 09-14-2011, 05:54 PM
BullRhino BullRhino is offline
Registered User
 
Join Date: Sep 2011
Posts: 2
Default

I went ahead and disconnected my Edge EZ and that seems to have solved the problem.
Reply With Quote
  #3  
Old 09-15-2011, 03:51 PM
12valveman 12valveman is offline
Professional
 
Join Date: Feb 2008
Location:
Posts: 146
Default

have seen on early gen of these wiring rubthrough on injector harness under valvecover for injectors but have also seen electrical injecotr failures nothing mechanical with them they just show and open intermittently causing this code... but still would unhook add on first and try
Reply With Quote
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Acceleration problems Soco3087 3rd Gen Dakota 8 11-12-2015 11:33 AM
2004 ram hemi low speed acceleration john_2216 3rd Gen Ram Tech 6 11-09-2015 09:42 PM
Problems after installing hughes air gap zramsst 2nd Gen Ram Tech 3 08-11-2015 01:00 AM
1st Gen scantool ???? onemore94dak 1st Gen Dakota 12 07-26-2015 02:43 PM
'96 P300, P301, P302 Codes Crytot 1st Gen Dakota 5 07-13-2015 05:26 PM


Tags
dtc, injector voltage

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

 

All times are GMT -4. The time now is 02:11 AM.