$20 Oil Catch Can Install Directions Here!!!
#11
#12
#14
RE: $20 Oil Catch Can Install Directions Here!!!
I installed mine on the intake side yesterday. just to make sure I did it right. the flow of things on this side according to the arrow on the filter should be from the intake pipe to the valve cover. Correct???
Someone please reply so I can correct if necessary
Thanks
Someone please reply so I can correct if necessary
Thanks
#15
RE: $20 Oil Catch Can Install Directions Here!!!
The arrow should be from the valve cover to the intake. Valve cover>>>CC>>>Intake. Make sure to install the other CC on the pcv side. PCV>>>CC>>>TB. I empty that one at least once a week. I haven't had to empty the intake CC yet but it is trapping oil.
#16
RE: $20 Oil Catch Can Install Directions Here!!!
I did the one on the pcv side first. I bought one from the neon store before i found out I cound get one from the hardware store for $20.00. It's ok, it holds a lot more oil and compliments the CAI in the looks department.
Thanks for your help.
Thanks for your help.
#19
RE: $20 Oil Catch Can Install Directions Here!!!
i 'm sort of confused here about this occ ,is there actually 2 of them that need to be installed ?and if so just exactly where does the second one go?[i know one goes to the pcv]the link for this modification is very good but it only shows where the pcv occ goes.any input on this would be greatly appreciated.?
#20
RE: $20 Oil Catch Can Install Directions Here!!!
topcop441: between the valve cover and the intake on the drivers side. if you have the stock intake you don't need one, the valve cover line ends at a filter in the intake air box. definitely need one if you install a short ram or a cold air intake. valve cover>>>cc>>>intake.