1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

injection help

Thread Tools
 
Search this Thread
 
Old Mar 22, 2008 | 11:04 PM
  #1  
dive_bomb's Avatar
dive_bomb
Thread Starter
Joined: Mar 2008
Posts: 13
Likes: 0
From:
Default injection help

Is type of injection the only difference between the magnum 3.9 and old 3.9?
If so, could I convert my 1990 3.9 over to throttle port just by switching manifolds and computers?
 
Reply
Old Mar 22, 2008 | 11:56 PM
  #2  
hitandrun83's Avatar
hitandrun83
Rookie
Joined: Mar 2007
Posts: 60
Likes: 0
From:
Default RE: injection help

what years are the engines? you should be able to look on the block and see, itll say v6 on the side, probably on the passenger side of the block, then the month and year. I found out the hard way that you cant just drop a 94 in a 89, had to swap heads out plus intake manifold.
 
Reply
Old Mar 23, 2008 | 12:40 AM
  #3  
Bad96_3.9's Avatar
Bad96_3.9
All Star
Joined: May 2006
Posts: 867
Likes: 3
From: Crawfordville, FL
Default RE: injection help

go to allpar.com, they have a big write up on the difference between LA and Magnum engines. It helped me alot!
 
Reply
Old Mar 23, 2008 | 10:17 AM
  #4  
dive_bomb's Avatar
dive_bomb
Thread Starter
Joined: Mar 2008
Posts: 13
Likes: 0
From:
Default RE: injection help

thanks for all the help, i really appreciate it
 
Reply




All times are GMT -4. The time now is 02:19 PM.