shock mounts for rear
#1
shock mounts for rear
does anybody have a picture of how they are suposed to be mounted??? i cant figure it out granted i dont have any shocks at all in the rear right now lol no its not on the road the i just bought the truck and the guy wanted the shocks that were on it idk why so he took them off trucks pretty beat up but it is 4wd and thats all i cared about took it for a ride and started bouncing all over the place thats when i found there was no shocks so id like to see just how there suposed to be mounted its a 94 auto converted to a 5spd with a massive rear driveshaft out of somthing lol
please note its not the truck in my cig thats my other dakota
please note its not the truck in my cig thats my other dakota
#2
#3
Yeah, the shocks won't look like your 2nd gen, cause they have one angled forward and one backward. Both the shocks on the 1st gens angle backwards. Here are some pics... they won't look like your shocks cause I have towing shocks with a coil helper spring and chrysler 9.25" rear axle with custom shock mount tabs. Also, how big is ya'll driveshaft, cause mine is steel but it isn't that big.
Right
DSCN0262.jpg?t=1243135655
Left
DSCN0264.jpg?t=1243135679
Bottom mount
DSCN0265.jpg?t=1243135715
Top Mount
DSCN0266.jpg?t=1243135741
View from the front
DSCN0267.jpg?t=1243135755
Right
DSCN0262.jpg?t=1243135655
Left
DSCN0264.jpg?t=1243135679
Bottom mount
DSCN0265.jpg?t=1243135715
Top Mount
DSCN0266.jpg?t=1243135741
View from the front
DSCN0267.jpg?t=1243135755
Last edited by 95_318SLT; 05-23-2009 at 11:43 PM.
#4
I'll try and get a pic tomorrow, it looks a little bigger than yours. It's a PITA to get U-joints for too, the yoke end is normal Chrysler internal clip style and driveshaft end uses external clips, not to mention the cap sizes are even something like .010" different. I went to Six States to get the joints and the Spicer book they have says the aluminum shaft was only used till 94, yet the original sticker dated april 95 was still on my driveshaft. Luckily the guys at Six states are really helpfull and crawled under my truck to verify what was going one.
#6
LOL! Yeah, that 9.25 inch rear axle was in absolutely mint condition when I got it, but now it's been hacked up from relocating the spring perches and shock tabs and the sticker is half covered in black paint from where I painted over the welds.
#7