1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

6-bolt to 5-bolt

Thread Tools
 
Search this Thread
 
Old Mar 17, 2010 | 01:45 AM
  #11  
Moparkid13's Avatar
Moparkid13
Rookie
Joined: Mar 2010
Posts: 63
Likes: 0
From: Western N.C.
Default

why dont you o to your nearest auto parts store and ask for 89 or so hubs
 
Reply
Old Mar 17, 2010 | 09:02 AM
  #12  
bill55az's Avatar
bill55az
Veteran
Joined: Mar 2005
Posts: 354
Likes: 0
From: AZ and Utah
Default

For the front, older 5 lug hubs....available cheap at junk yards. There are usually enough dakotas in the yards near me to get a fresh set. Your location may be different.
for the rear, go to the junk yard and get the axle shafts from a 5 lug axle, or even the entire axle....you might find a suregrip and want to add that as well. That is how I got mine.
 
Reply
Old Mar 17, 2010 | 04:30 PM
  #13  
miggity's Avatar
miggity
Registered User
Joined: Mar 2010
Posts: 20
Likes: 0
From: Newport News, Va
Default

86-91 have the 5 lug pattern. The parts from those years swap right over to 92-96.

- miggity
 
Reply
Old Apr 27, 2010 | 11:51 PM
  #14  
Moparkid13's Avatar
Moparkid13
Rookie
Joined: Mar 2010
Posts: 63
Likes: 0
From: Western N.C.
Default

will 99 hubs and rearend work on a 89 kota
 
Reply
Old Apr 28, 2010 | 01:10 AM
  #15  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

Originally Posted by Moparkid13
will 99 hubs and rearend work on a 89 kota
The rear end will with a little work. But the hubs won't not from that year. But you can buy a 91-96 hubs from any auto part store. Also don't be scared to start a new thread instead of brining up an old one.
 
Reply
Old Apr 29, 2010 | 11:49 AM
  #16  
bill55az's Avatar
bill55az
Veteran
Joined: Mar 2005
Posts: 354
Likes: 0
From: AZ and Utah
Default

For the front, you should be able to just buy 1990 rotors....check to see if both years use the same inner and outer bearings....
For the rear, find an 87 to 90 rear axle at the JY, pull the axle shafts...
 
Reply




All times are GMT -4. The time now is 02:50 AM.