1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Blower switch

Thread Tools
 
Search this Thread
 
Old Jan 20, 2010 | 11:58 AM
  #1  
bullwinkle's Avatar
bullwinkle
Thread Starter
|
Registered User
Joined: Aug 2009
Posts: 18
Likes: 0
From: Anchorage
Default Blower switch

I have a 93 Dakota with a/c. My blower works on the two highest settings only. I have checked the fuse and replaced the resistor. I believe the switch is the culprit, my problem is I can't locate a switch. The ones I can find are 5 pronged and are just the switch. Mine is a 6 pronged and has the switch in a housing that includes a forked arm that connects to the hand control lever (I can pull it again and attach a picture later if I have to). I can't seem to be able to locate a replacement anywhere. Any ideas on where I can find one? Any ideas would be appreciated.
 
Reply
Old Jan 20, 2010 | 12:14 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

Junkyard may be your best choice. You can try OEM. We have a few sites in the FAQ2. Or go to your local Dodge Dealer.
 
Reply
Old Jan 20, 2010 | 03:13 PM
  #3  
bullwinkle's Avatar
bullwinkle
Thread Starter
|
Registered User
Joined: Aug 2009
Posts: 18
Likes: 0
From: Anchorage
Default

Nothing in the junkyards locally, and I can't seem to find it on line anywhere. Anyone else run into this??
 
Reply
Old Jan 20, 2010 | 03:42 PM
  #4  
Tizzy1's Avatar
Tizzy1
Champion
Joined: Jan 2010
Posts: 3,023
Likes: 5
Default

from the dealer you need to get the entire control head and they are around $275. Amazingly they are still available.
 
Reply
Old Jan 21, 2010 | 01:25 AM
  #5  
dodgerules86's Avatar
dodgerules86
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
Default

You might have to rig up a switch. Ya know, a home-made wonder. Oh yea!
 
Reply




All times are GMT -4. The time now is 10:29 PM.