1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Same part/different trucks???

Thread Tools
 
Search this Thread
 
  #1  
Old 11-17-2010, 01:00 AM
Z Guy's Avatar
Z Guy
Z Guy is offline
Rookie
Thread Starter
Join Date: May 2009
Location: boise
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default Same part/different trucks???

hey all! my front drive shaft is trashed and for some reason there are no Dakotas in junk yards around here.
so i'm wondering if the same front drive shaft was put into anything else like Jeeps, rams, etc...?

I have a 94 dakota with the 318 v8, 4x4, manual, ex-cab
 
  #2  
Old 11-17-2010, 01:45 AM
Hahns5.2's Avatar
Hahns5.2
Hahns5.2 is offline
Record Breaker
Join Date: Mar 2009
Location: Battle Ground WA
Posts: 2,181
Likes: 0
Received 2 Likes on 2 Posts
Default

Check out Jeep Cherokees, they have basically the same driveshaft, dunno about the length though, same goes for 91-94 explorers.
 
  #3  
Old 11-17-2010, 01:02 PM
Z Guy's Avatar
Z Guy
Z Guy is offline
Rookie
Thread Starter
Join Date: May 2009
Location: boise
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

good info. thanks
 
  #4  
Old 11-18-2010, 11:59 PM
Z Guy's Avatar
Z Guy
Z Guy is offline
Rookie
Thread Starter
Join Date: May 2009
Location: boise
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

got a line on one from a 99 durango... being that these were all automatic and such shouldn't be an issue right?
 



Quick Reply: Same part/different trucks???



All times are GMT -4. The time now is 04:19 PM.