1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Programmer

Thread Tools
 
Search this Thread
 
Old Jan 24, 2011 | 11:16 PM
  #1  
InnerCityHillBilly's Avatar
InnerCityHillBilly
Thread Starter
|
Veteran
Joined: Aug 2010
Posts: 403
Likes: 0
From: Columbus, Ohio
Default Programmer

does anyone know of a programmer/ tuner out there for our generation of dakota
 
Reply
Old Jan 24, 2011 | 11:26 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

Here is copy and paste from the FAQ2.

Performance Computer Upgrades
________________________________________

Engine Stand Alone Engine Management Systems

http://www.fuelairspark.com/Products...er/sb/over.asp

Factory Computer Reflashes

There are very little for Dodge OBD1.

The best would be a Mopar performance computer. You can get them at http://www.mopar.com/performance/index.html or http://www.summitracing.com/

Jet chips has a plug in. It has been cheep quality and not worth it for most. http://www.jetchip.com/

You can get http://www.hypertech.com/Products/Po...uning%20Module (No reviews yet)

Here is one that flashes and can give you a handheld unit. http://www.bgperformancepcm.com/#magnum
At once this site had it listed but the site seems to be down now. http://nrar.com/

You can Also get get a multi-processor-driven signal manipulator that goes in-line between your engine and ECU.
http://www.unichip.us/dodge.asp

Petersen's 4Wheel & Off-Road Magazine did an article on it.
http://www.4wheeloffroad.com/techart...ing/index.html
________________________________________
 
Reply




All times are GMT -4. The time now is 06:36 PM.