1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

turn & flash

Thread Tools
 
Search this Thread
 
Old May 22, 2011 | 02:08 PM
  #1  
89newbie's Avatar
89newbie
Thread Starter
|
Captain
Joined: Mar 2010
Posts: 635
Likes: 0
From: Pa. now
Default turn & flash

Repaired harness a week ago, some dufas had played with harness ground up under the truck, ran supplimental ground all good. Terrible rain & water today lost turn signals had flashers, two minutes later lost flashers. What feeds these circuits?? HAve run lights and brake lights,, for now

Part two blown fuses both disconnected supplimental ground replaced fuses. Going to leave it that way, when pulling trailer Ill bond them and that will be that.
 

Last edited by 89newbie; May 22, 2011 at 10:55 PM.
Reply
Old May 26, 2011 | 02:45 AM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

The manual will have all the ground locations.
 
Reply
Old May 26, 2011 | 02:31 PM
  #3  
89newbie's Avatar
89newbie
Thread Starter
|
Captain
Joined: Mar 2010
Posts: 635
Likes: 0
From: Pa. now
Default

Originally Posted by Crazy4x4RT
The manual will have all the ground locations.
Working with a wiring sitituation that someone in the past butchered. Disconnected supplimental ground replaced fuses for flashers and turnsignals and all o.k. Next step is to supplimental ground trailers with bonding wire, not relying on ground from ball and hitch. Getting ready to move and up to my hips in alligators.
 
Reply




All times are GMT -4. The time now is 01:50 PM.